Description
It is made of polypropylene, shock and load resistant, impervious to fuel and acetic acid. Notches and lugs hold the hose in position. Ιn addition, the hose must be secured with stainless steel clamps. Connector is easy to fit, by means of 4 screws outside. When installing the blower, we recommend to place the exhaust louvered ventilator in a reasonably protected area (for example, in the cockpit rather than on the transom), so as to prevent water intrusion into the ventilation circuit.
An extra precaution consists in building an elbow in the hose.
| Code | |
|---|---|
| 51069 | Ventilator Connector, Elbow, Ø102mm, White |
| 51070 | Ventilator Connector, Straight, Ø102mm, White |
| 60071 | Ventilation Shaft Grilles Cover, Ø102mm, White |
Reviews
There are no reviews yet.