Description
Scanstrut SPR-8-AM ScanPod arm pod is perfect for installations where space is limited. This 9″ arm pod is designed with the latest generation screens in mind and is as low profile as it gets.
The Scanstrut Arm Pod allows you to install your MFD onto any standard or curved rail from 25mm to 33.7mm (0.98″ – 1.33″) diameter. Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, the machined aluminium clamp and into the rail. This gives you the cleanest and most user-friendly way to mount your MDF right where you need it the most.
Scanstrut SPR-8-AM fits the following devices:
Chartplotters & Fishfinders:
– B&G Vulcan 7 (with flush mount), Vulcan 9, Zeus Touch 8, Zeus3 7, Zeus3 9, Zeus3s 7 & Zeus3s 9
– Furuno GP-1870, GP-1971F, O-Chart 5/5F & O-Chart 7/7F
– Garmin EchoMap 74sv, 73sv, 74dv, 73dv, EchoMap 9 Series, EchoMap CHIRP 75dv / 75sv, EchoMap CHIRP 95sv, EchoMap Plus 9, EchoMap UHD 9″, GPSMap 7408/7608, GPSMap 820/820xs, GPSMap 840/840xs, GPSMap 922/922xs, GPSMap 923, GPSMap 943xsv, Striker Plus 9 & Striker Vivid 9sv
– Humminbird 800 series, 900 series & Helix 7
– Lowrance Elite 9 Ti / Ti2, Elite FS 7, HDS-8 / HDS-8m / Gen 2, HDS-9 Gen3, HDS-9 LIVE, HOOK 9 / 9x & HOOK Reveal 9″
– Northstar Explorer 6 & M84
– Raymarine A50/50d, A57d, A70/70d, Axiom 9, Axiom 9+, C Series – C70, C95/C97, E95/E97, Element 9 HV, Element 9 S & ES 75/77/78
– Simrad Cruise 7, Cruise 9, GB40 10″ Monitor, Go7 (with flush mount), Go9, Go9 XSE, NSS-8, NSS7 evo3 & NX40
Instruments & Autopilots:
– B&G Nemesis 9
– Maretron TSM810C
– Northstar Explorer AP380
– Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe install & repeat servicing.
– Pod seal is made from a high tear strength silicone; it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.
– As standard, you will receive your Scanpod uncut. For a small charge, Scanstrut can offer a factory cutting service.
– Viewing angle can be set upon installation. Cables are routed internally through the clamp & onto the rail.
Specifications
| Brand | Scanstrut |
| Cut Out | Maximum: 267mm x 167mm (10.5″ x 6.6″) |
| Height | Pod: 228mm (8.97″), Rail Clamp: 55mm (2.16″) |
| Width | Overall: 350mm (13.8″), Pod: 324.0mm (12.75″) |
| Depth | Overall: 185mm (7.2″), Front: 85mm (3.3″), Back: 100mm (3.9″) |
| Length | Overall: 350mm (13.8″), Arm: 198.5mm (7.8″) |
| Diameter | Pod Rotation OD: 348mm (13.7″), Fits Rail OD: 25mm to 33.7mm (0.98″ – 1.33″) |
| Dimensions | Maximum Usable Display: 289mm x 190mm (11.4″ x 7.5″) |
More Info/Downloads
spr 7 7s 8 am installation instructions
Manufacturer Part Number: SPR-8-AM
Reviews
There are no reviews yet.