Cruise 3.0 R

Description

Product

• Improved robustness and improved corrosion protection
• 3,000 W input power, in terms of propulsion is comparable with a 6-hp petrol outboard
• Maximum efficiency outboard

Ordering information

• Item number: 1261-00 | EAN: 4260113696705

• Throttle not included – best paired with Remote throttle for Travel, Ultralight and Cruise
• Equipment included: Outboard, connection to remote steering (S: 4.4m L: 4.3m, 35 mm²) including main switch and propeller B 12 x 10,5 WDR
• Warranty: 2 years for non-commercial use

• Cruise 3.0 R

  The new models of the Cruise 3.0 have been improved to meet the demanding challenges of everyday commercial use; making them ready to take on the harshest environmental conditions, for example with dinghies and sailboats up to 3 tons.

  This makes the Cruise even more rugged in the event that it runs aground and even better protected against corrosion when used extensively in salt water.

  The Cruise 3.0 is comparable to a 6 HP petrol outboard and can be easily mounted on your boat with a couple of tools, regardless of whether the remote or tiller version.

  A power supply from at least one lithium battery (Power 24-3500) or with lead batteries (lead-gel or AGM) must be provided for operation.

  Cruise 3.0 R – Benefits:

  • High-efficiency outboard with 3,000 W input power, equivalent to a 6 HP petrol outboard.
  • All Cruise models are suitable for inflatables and other small boats.
  • We recommend the Cruise 3.0 for dinghies and sailboats up to 3 tons.
  • Remote steering connector option.
  • Rugged aluminium pylon with integral fin – extra robust even when running aground.
  • Shaft sealant rings mounted in protected area on the inside of the pylon.
  • Highest-grade seawater-proof aluminium for long service life, even in the harshest conditions.
  • Lubricant-free polymer plain bearings protect against damage from fishing lines or debris and provide improved mechanical support for propeller shaft – wear-resistant and maintenance-free.
  • Comprehensive galvanic corrosion protection through careful matching of all materials and meticulous isolation of materials with different electrochemical properties.
  • Everything is waterproof to min IP67.

  Connection for standard remote steeringAvailable with short or long shaft – as you -resistant aluminium integral finRugged: aluminium housing with shaft sealant rings on the insideOptimised propeller design: For greater thrust or more speedCruise Info Tool

  Specifications

  Technical Data Cruise

  	Cruise 3.0 R
  Input power in watts	3000
  Propulsive power in watts	1530
  Comparable petrol outboards (propulsive power)	6 HP
  Comparable petrol outboards (thrust)	8 HP
  Maximum overall efficiency in %	51
  Static thrust in lbs*	142
  Integrated battery	–
  Nominal voltage	24
  Final charging voltage	–
  Total weight in kg	18.9 (S) / 19.4 (L)
  Motor weight without battery in kg	–
  Weight of integrated battery	—
  Shaft length in cm	62.5 (S) / 75.5 (L)
  Standard propeller v = speed in km/h at p = power in watts	Propeller B 12 x 10,5 WDR
  Alternative propeller options	—
  Propeller Guide
  Maximum propeller speed in rpm	1100
  Control	Remote throttle
  TorqLink	No
  Steering	Provision to connect to standard remote steering; lockable
  Tilting device	Manual with grounding protection
  Tilt angle	61,3°
  Trim device	Manual, 4-step
  Integrated on-board computer	Yes
  Stepless forward/reverse drive	Yes

  * Torqeedo static thrust measurement is based on internationally accepted ISO standards. Static thrust figures for conventional trolling motors are typically measured differently, which results in higher values. To compare Torqeedo static thrust data with conventional trolling motors, add approximately 50% to the Torqeedo static thrust of Conformity Cruise 3/6/12

  Technical Drawing

  Dimensions Cruise 3/6 RS / RL outboards