Description
This NAC-3 Autopilot Core Pack is made up of the high-current NAC-3 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit, ideal for vessels above 10 meters (33 feet) in length.
The NAC-3 Autopilot Computer contains the electronics needed to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with other components including heading sensors and rudder feedback units.
The NAC-3 is designed for boats greater than ten metres (35 feet) in length and is rated to operate high-current pumps, mechanical drive units, and solenoid valves (30 amps continuous/50 amps peak).
NAC-3 features
– B&G Reflex Sailing algorithms
– Plug and Play installation
– 12/24V input 8A continuous output, 12A peak
– Solenoid output capable
– 3A clutch output
– Optional Auto/Standby Switch
The Precision-9 compact compass is easy to install and provides accurate heading and rate-of-turn information to B&G, Simrad and Lowrance autopilot, radar and navigation systems over an NMEA 2000® connection.
Precision-9 features
– Heading, Rate Of Turn (ROT), pitch and roll output over NMEA 2000®
– Accurate and reliable solid-state sensor technology
– Heading accuracy of ±2° after calibration
– Easily adjustable mounting bracket allows bulkhead or up-mast installation
– IPX7 waterproof for external up-mast mounting on steel hulled vessels
– Simple installation with a single NMEA 2000® connection
The RF25 is a medium duty rudder feedback unit with a SimNet interface. It attaches directly to Simnet systems for straight-forward installation.
RF25 features
– +/- 120 Degree Measurement
– Precise and Accurate; +/- 0.5 Deg
– SimNet Connectivity
– 5.5m attached SimNet Cable
Minimum product requirements: Requires a hydraulic steering pump or mechanical drive unit, and a compatible autopilot controller or networked multifunction display.
Key Features
Core components for a B&G Reflex autopilot system – just add a drive unit and controller
Ideal for boats above 10 metres (35 feet) in length
Includes the high-current NAC-3 autopilot computer
Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
Control with the B&G Triton² display and Triton² keypad, or a networked multifunction display
Includes the RF25N rudder feedback unit
Includes the Precision-9 solid-state compass for accurate heading data
Includes all required NMEA 2000® network connectors and cables
Easy setup with automatic tuning and compass calibration
NMEA 0183® input
Specifications
| Brand | Navico |
| Application | Boats from ten metres (35 feet) in length |
| Voltage | 12/24V DC (+/- 10-30%) |
| Contents | NAC-3 Course Computer, Precision-9, Compass, RF25 Rudder Feedback Unit, NMEA 2000 Backbone Kit, Documentation |
More Info/Downloads
Commissioning Manual NAC 2 and NAC 3 Autopilot ComputerInstallation Manual NAC 2 and NAC 3 Autopilot ComputerMounting Template Precision 9
Manufacturer Part Number: 000-13336-001
Reviews
There are no reviews yet.