Description
Lenco 15047-101 trim tab kit has all the robust features of their single actuator XD series with twice the actuator power for larger, faster boats that operate in rough conditions. Boat lengths 25’ (7.62m) to 50′ (15.2m). Blades are constructed of Electro-Polished 10 gauge (3.4 mm) laser cut 304 stainless steel with 1” (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 3/8” (9.5 mm) diameter hinge pin. Full transom back plate with mechanical strain-relief cable seals, welded on stainless steel upper & adjustable lower actuator mounting brackets, 3/8” (9.5 mm) stainless steel mounting bolts. 3.75” (9.5 cm) sacrificial anodes installed.
Lenco trim tab kit contents:
– 2x 10-gauge stainless steel Electro-Polished blades
– 4x 15056-001 XD Extreme Duty actuators with 6′ (1.8 m) leads & Deutsch connectors
– Lenco owner’s/installation manual
Note: Boat-mounting hardware to be supplied by the customer. Actuator extension harnesses are available to be purchased separately (4 required).
Specifications
| Material | Electro-Polished Stainless Steel 304 |
| Primary Construction | Stainless Steel 304 |
| Suitable For | Vessels under 12 Metres / 39.4 feet|Vessels under 20 Metres / 65.6 feet |
| Brand | Lenco |
| Application | 25′ – 50′ (7.62m – 15.2m) Boats |
| Voltage | 12V DC |
| Contents | 2 Electro-Polished stainless steel blades, 4 XD Extreme Duty actuators 12V, Owner/installation manual |
| Height | Transom: 10.5″ (26.7cm) minimum |
| Width | 14″ |
| Length | 24″ |
| Thickness | Blade: 3.4mm (10 Gauge) |
| Warranty | 3 Years |
Manufacturer Part Number: 15047-101
Reviews
There are no reviews yet.