Description

<
This special block was designed and developed for marinas, scaffolders, builders and any engineer who needs multiple lift options at a given worksite.
Manufactured of black glass filled nylon and stainless steel, this durable Series 7 precision plain or ball bearing sheave block is CE certified for secure quality and compliance. The stainless steel becket at the base provides leverage when required. The attached Dyneema spliced strop can be slipped around a pole, tube or bar to create a bespoke lifting device for tools, equipment or panels – and then removed or relocated when the job is complete.

Important note:

Suggested boat sizes are given as a guidance only and assume a monohull with boom end sheeting, loaded vertically to the traveller.

Mid-boom sheeting, severely angled take offs and curved tracks can impose greater loads and suitable allowances should be made for this. If at all unsure of your choice it is important to seek further advice. If you are close to the maximum boat size suggested, we would advise upgrading to a Torlon package, long car or the next size up.

Blocks

Mainsheet blocks end boom sheeting

Spinnaker sheet / guy blocks

Mast base / halyard blocks

Kicker blocks