Description
<
High load low friction eyes
High Load Eyes
Available in six sizes. Manufactured in marine grade aluminium with a hard anodised finish.
These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. The smallest size can be attached using a 3mm line with a bullseye diameter of 6mm. The largest size can be attached using a 16mm line with a bullseye diameter of 28mm.
High load eye compared to a standard plain bearing block on average across the range
Friction increase by only 15% Strength increased by 272% Weight reduced by 51%
Data based on using 4mm D12 SK75 Dyneema core.
Ergonomically designed to maximise the strength and efficiency of the eye. With HV500 hard anodising and the profile of the curved surfaces, these have been developed to keep friction as low as possible. The range has amazing strength to weight ratios, making them ideal for use as kickers, tweakers, genoa barber haulers, anywhere where weight saving and strength is important.
Wear Resistance
The hard anodising HV500 has amazing low friction properties. After over 300 hours on an abrasion test machine no visual signs of wear on the anodised coating could be found.
High Load Eye With Dyneema Loop
The Barton high load eye with loop is available in three sizes and can be used in various applications on board including barber hauler, preventers, mast base block tidies, emergency blocks, occasional blocks and toe rail blocks etc.
The high load eye combined with the Dyneema loop gives you a fast, efficient, simple and extremely strong solution for changing the direction of any line. The hard anodised aluminium eye is designed to have very good wear resistant properties with low friction, which combined with the high strength Dyneema loop gives you exceptional low weight to very high performance & load ratio.
| Part No. | External ø (mm) | Internal rope ø (mm) | Bore ø (mm) | Loop length (mm) | SWL (kg) | Weight (g) | ||
| High load low friction eye | High load low friction eye – 12mm | 60449 | 12 | 3 | 6 | – | 300 | 0.8 |
| High load low friction eye – 18mm | 60450 | 18 | 4 | 9 | – | 550 | 3 | |
| High load low friction eye – 26mm | 60451 | 26 | 6 | 12 | – | 800 | 5 | |
| High load low friction eye – 38mm | 60452 | 38 | 10 | 16 | – | 1800 | 24 | |
| High load low friction eye – 52mm | 60453 | 52 | 12 | 22 | – | 3300 | 52 | |
| High load low friction eye – 65mm | 60454 | 65 | 16 | 28 | – | 4500 | 104 | |
| High load low friction eye with Dyneema loop | High load low friction eye with Dyneema loop – 12mm | 60460 | – | – | 12 | 100 | 750 | 11 |
| High load low friction eye with Dyneema loop – 22mm | 60461 | – | – | 22 | 230 | 2400 | 91 | |
| High load low friction eye with Dyneema loop – 28mm | 60462 | – | – | 28 | 310 | 3600 | 152 |
Reviews
There are no reviews yet.