Performance Tab Kit Without Switch

Description

Our first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Boat lengths 13’ (4 m) to 40’ (12.2 m). Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with 1” (2.5 cm) turned up edges and a 5 degree taper on the inside, heavy duty hinge with 1/4” (6.4 mm) diameter hinge pin.

L” X W”: 9″ x 9″ (22.86 x 22.86 cm)

• Boat Length: 13′ – 20′
• Hinge Height: 2″ (5.1 cm)
• Height: 13.5″ (34.3 cm)
• (2) 12-gauge stainless steel Electro-Polished blades
• (2) 15054-001 actuators with 6’ (1.8 m) leads & Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses – 20’ (6.1 m) length
• (2) 15085-001 upper mounting brackets with gland seal
• (2) 50014-001 lower mounting brackets
• Lenco owner’s/installation manual
• Stainless steel mounting hardware

L” X W”: 12″ x 9″ (30.48 x 22.86 cm)

• Boat Length: 16′ – 26′
• Hinge Height: 2″ (5.1 cm)
• Height: 11″ (27.9 cm)
• (2) 12-gauge stainless steel Electro-Polished blades
• (2) 15054-001 actuators with 6’ (1.8 m) leads & Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses – 20’ (6.1 m) length
• (2) 15085-001 upper mounting brackets with gland seal
• (2) 50014-001 lower mounting brackets
• Lenco owner’s/installation manual
• Stainless steel mounting hardware

L” X W”: 16″ x 12″ (40.64 x 30.48 cm)

• Boat Length: 20′ – 36′
• Hinge Height: 2″ (5.1 cm)
• Height: 11″ (27.9 cm)
• (2) 12-gauge stainless steel Electro-Polished blades
• (2) 15054-001 actuators with 6’ (1.8 m) leads & Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses – 20’ (6.1 m) length
• (2) 15085-001 upper mounting brackets with gland seal
• (2) 50014-001 lower mounting brackets
• Lenco owner’s/installation manual
• Stainless steel mounting hardware