Description

DS30-S Vertical Stainless Cable Seal

DS30-S

IP68 vertical entry cable seal

For cables from 9-14mm (0.35″-0.55″), connectors up to Ø30mm (1.18″) an aesthetic dome-shaped profile provides a stronger, impact-resistant design and captive nuts in the base make for an easy assembly.

Product Information.

Watertight Installation
Tapered bung forms a watertight seal. All units are supplied with a closed-cell base seal – 100% waterproof. All models have been IP68 tested and approved.

Easy and Reliable Installation
Captive nuts make for easy assembly and also allow reliable repeat installations. Each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.

No Need to Remove Cable Connectors
Split-seal option does not require connector removal during install.

Multi-Functional Dome Shape
The aesthetic dome-shaped profile provides a stronger, impact-resistant design and outer dome provides additional water shield.

Technical Information

• DS30-S Technical Drawing
• DS30-S Installation Instructions