Description
Scanstrut SPH-9-W ScanPod Helm Pod is designed for mounting your display right where you need it. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98″ – 1.33″) in diameter. This allows you to have your display in the prime position while out sailing on your sailing boat.
Scanstrut Helm Pod SPH-9-W fits the following devices:
Chartplotters & Fishfinders:
– B&G Zeus 8 & Zeus2 9
– Furuno 1724C / 1734C, GD-1720C & MFD8
– Garmin EchoMap Ultra 10″, GPSMap 1022/1022xs, GPSMap 1042xsv, GPSMap 4008 / 5008 / 6008, GPSMap 7410 / 7610 & GPSMap 8410
– Humminbird 998cx SI, Helix 8 G3, Helix 9 G3, Onix 10, Onix 8 & Solix 10 Chirp Mega SI+ G3
– Lowrance Elite 12 Ti / Ti2 & Elite FS 9
– Northstar 6100i – 6.4″ & 8.4″
– Raymarine a95, a97, a98 MFD, Axiom Pro 9S / 9RVX, C Series – C80, C Series – C90W, E Series – E80, E90W, E90W/A95, ES 95/97/98, Raychart 620 & RL70
– Simrad NSE-8, NSS-9, NSS-9 evo2, NSS-9 evo3s, NSS7 evo4 & NSS9 evo3
Instruments & Autopilots:
– Northstar Explorer AP380
– Universal helm fixing: Fits pedestal rails 25mm – 33.7mm (0.98″ – 1.33″) OD.
– Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.
– No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.
– Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.
– Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.
– Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.
Specifications
| Brand | Scanstrut |
| Cut Out | Maximum Display: 314mm x 185mm (12.3″ x 7.3″) |
| Height | 243mm (9.56″) |
| Width | 374mm (14.7″), Fits distance between mounting rails: 152.4mm to 304.8mm (6″ – 12″) |
| Depth | 167mm (6.6″) |
| Diameter | For Pedestal Rail OD: 25mm to 33.7mm (0.98″ – 1.33″) |
| Dimensions | Maximum Usable Face: 336mm x 207mm (13.2″ x 8.14″) |
More Info/Downloads
sph 3i 4i 8 9 12 13 15d system w installation instructions
Manufacturer Part Number: SPH-9-W
Reviews
There are no reviews yet.