Description
A400 Roll swaging machine for 8 to 28mm wire.
Typical applications:
- Standing rigging and lifelines for larger sailboats and yachts.
- Architectural, like balustrades,railing and hanging bridges.
- Often used to build support structures for membrane roofs and tents.
- Structural rigging for sail-roofs and sail-shades.
Features:
- Fully approved by Lloyd’s Register of Shipping.
- Include full sets of pullers.
- Dies and pumps sold separately.
Spec Sheet
Wireteknik brochure c/w operating instructions & wire swaging dimensions
Operating Instructions
·Use a pair of roller dies to fit the cable diameter
·Slip the dies onto the cogwheel synchronizing pins
·The arrows on the dies point in the direction of swaging
·Attach the terminal to the attachment fixture on the drawbar
·Adjust the length so the roller dies meet the terminal shank at the desired position
·Apply enough hydraulic pressure so the roller dies holds the terminal firmly
·Mark and insert the cable into the terminal throat
·Move the transparent protective shield into position
·Apply hydraulic pressure to draw the terminal between the roller dies
·As the roller dies rotate, they will press the terminal shank onto the wire rope
·Measure the diameter of the terminal after swaging, compare with the wire swaging dimensions list
Note: The swager is designed to reduce the terminal shank to required diameter in one pass. However dimension variations of terminals, cables or material hardness could make it necessary to pass the terminal twice.
When swaging solid rods, a special swaging compound must be used. After swaging wipe off the roller dies and swaging machine, apply a corrosion preventative.
The machines are designed to swage full steel wire rope or rod only.
Wire Swaging Dimensions
| Part | Swaging Range Wire Ø mm |
Length mm |
Width mm |
Height mm |
Weight Kg. |
RRP Inc VAT |
Unit | ||
|---|---|---|---|---|---|---|---|---|---|
| WT-A400 | A400 Swaging machine | 8 – 28 | 990 | 530 | 370 | 150 | POA | EACH | |
| WT-A400-08 | A400 Dies – 8mm (Pair) | 8 | – | – | – | – | POA | PAIR | |
| WT-A400-10 | A400 Dies – 10mm (Pair) | 10 | – | – | – | – | POA | PAIR | |
| WT-A400-12 | A400 Dies – 12mm (21.4) (Pair) | 12 (21.4) | – | – | – | – | POA | PAIR | |
| WT-A400-12E | A400 Dies – 12mm EU(20.0) (Pair) | 12 EU(20.0) | – | – | – | – | POA | PAIR | |
| WT-A400-14 | A400 Dies – 14mm (Pair) | 14 | – | – | – | – | POA | PAIR | |
| WT-A400-16 | A400 Dies – 16mm (Pair) | 16 | – | – | – | – | POA | PAIR | |
| WT-A400-19 | A400 Dies – 19mm (Pair) | 19 | – | – | – | – | POA | PAIR | |
| WT-A400-22 | A400 Dies – 22mm (Pair) | 22 | – | – | – | – | POA | PAIR | |
| WT-A400-25 | A400 Dies – 25/26mm (Pair) | 25/26 | – | – | – | – | POA | PAIR | |
| WT-A400-28 | A400 Dies – 28mm (Pair) | 28 | – | – | – | – | POA | PAIR |
Reviews
There are no reviews yet.